Marquis 530 Manuel du propriétaire Page 43

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 68
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 42
pause, the actual temperature displays. Press
TEMP+- pad repeatedly to decrease the set tem-
perature to 80°F (27°C).
*NOTE: In event of a power outage, all settings
revert to the preset, default settings.
HEAT MODE
Your spa comes preset in the standard heat mode.
For most applications, the standard mode should be
used. If you are in a warm weather climate and the
spa does not require as much heat, the economy
mode may work best. For a vacation home or for
very infrequent use, the sleep mode provides
filtration and circulation with lower energy demand.
In economy mode your spa heats only during the
filter cycle. In sleep mode your spa will maintain a
water temperature that is 20°F (7°C) below the set
temperature. This ensures your spa will be ready to
use more quickly (allow about one hour per one
degree F for heating your spa’s water) when
increasing the temperature to the desired level.
The spa’s heat mode can be adjusted to one of
three different settings:
Standard Mode
The spa water heats to the temperature as set at
the bather’s panel. In this mode the filtration pump
turns on for two minutes every half-hour to “poll” or
check the water. If heat is needed the unit heats to
the set temperature. The LCD window steadily
displays the actual temperature in this mode.
Economy Mode
In this mode the spa only heats to the set tempera-
ture during a filter cycle. The LCD window displays
“Ec” alternately flashing with the actual temperature
when the spa is up to temperature and “Ec” steadily
when the spa’s water temperature is below the set
temperature.
Sleep Mode
Your spa will maintain a water temperature that is
20°F (7°C) below the set temperature. Heater
functions only during a filter cycle. The LCD window
displays “SL” flashing alternately with the actual
temperature when the spa is up to set temperature
and displays “SL” steadily when below set
temperature.
spa control operation
43
Vue de la page 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 67 68

Commentaires sur ces manuels

Pas de commentaire